Risk assessment and remediation suggestion of impacted soil by produced water associated with oil production

Produced water is water trapped in underground formations that is brought to the surface along with oil or gas production. Oilfield impacted soil is the most common environmental problem associated with oil production. The produced water associated with oil-production contaminates the soil and causes the outright death of plants, and the subsequent erosion of topsoil. Also, impacted soil serves to contaminate surface waters and shallow aquifers. This paper is intended to provide an approach for full characterization of contaminated soil by produced water, by means of analysis of both the produced water and the impacted soil using several recommended analytical techniques and then identify and assay the main constituents that cause contamination of the soil. Gialo-59 oilfield (29N, 21E), Libya, has been chosen as the case study of this work. The field has a long history of petroleum production since 1959, where about 300,000 bbl of produced water be discharged into open pit. Test samples of contaminated soil were collected from one of the disposal pits. Samples of produced water were collected from different points throughout the oil production process, and the analyses were carried out at the labs of Libyan Petroleum Institute, Tripoli, Libya. The results are compared with the local environmental limiting constituents in order to prepare for a plan of soil remediation. The results showed that the main constituents (pollutants) that impact the soil are salts and hydrocarbon compounds. Accordingly; an action of soil remediation has been proposed to remove the salts and degradation of hydrocarbons.     

Reliable method for prediction of the flash point of various classes of amines on the basis of some molecular moieties for safety measures in industrial processes

This work presents a novel, reliable and simple method of estimating the flash point of various types of flammable amines, which are important for safety measures in industrial processes. Different amines include aliphatic amines such as primary, secondary, tertiary and cyclic amines as well as aromatic amines and hetero arenes containing nitrogen heteroatom. The proposed correlation is based on the contribution of some specific molecular moieties and functional groups, which can easily be used for any types of amines. Intermolecular forces are important in the new method, which are counted by two increasing and decreasing parameters. The root mean square (rms) deviation is 18 K for different classes of amines including 133 diverse compounds. The estimated flash points have been compared with one of the best available predictive methods, which gives much lower value of the rms deviation.     

High-level aminoglycoside resistance and virulence characteristics among Enterococci isolated from recreational beaches in Malaysia

We report the first study on the occurrence of high-level aminoglycoside-resistant (HLAR) Enterococci in coastal bathing waters and beach sand in Malaysia. None of the encountered isolates were resistant to high levels of gentamicin (500 μg/mL). However, high-level resistance to kanamycin (2,000 μg/mL) was observed in 14.2 % of tested isolates, the highest proportions observed being among beach sand isolates. High-level resistance to kanamycin was higher among Enterococcus faecalis and Enterococcus faecium than Enterococcus spp. Chi-square analysis showed no significant association between responses to tested antibiotics and the species allocation or source of isolation of all tested Enterococci. The species classification of encountered Enterococci resistance to vancomycin was highest among Enterococcus spp. (5.89 %) followed by E. faecium (4.785) and least among E. faecalis. A total of 160 isolates were also tested for virulence characteristics. On the whole, caseinase production was profoundly highest (15.01 %) while the least prevalent virulence characteristic observed among tested beach Enterococci was haemolysis of rabbit blood (3.65 %). A strong association was observed between the source of isolation and responses for each of caseinase (C?=?0.47, V?=?0.53) and slime (C?=?0.50, V?=?0.58) assays. Analysis of obtained spearman’s coefficient showed a strong correlation between caseinase and each of the slime production (p?=?0.04), gelatinase (p?=?0.0035) and haemolytic activity on horse blood (p?=?0.004), respectively. Suggestively, these are the main virulent characteristics of the studied beach Enterococci. Our findings suggest that recreational beaches may contribute to the dissemination of Enterococci with HLAR and virulence characteristics.     

Photooxidative removal of the herbicide Acid Blue 9 in the presence of hydrogen peroxide: modeling of the reaction for evaluation of electrical energy per order (EEO)

The present work deals with photooxidative removal of the herbicide, Acid Blue 9 (AB9), in water in the presence of hydrogen peroxide (H₂O₂) under UV light illumination (30 W). The influence of the basic operational parameters such as amount of H₂O₂, irradiation time and initial concentration of AB9 on the photodegradation efficiency of the herbicide was investigated. The degradation rate of AB9 was not appreciably high when the photolysis was carried out in the absence of H₂O₂ and it was negligible in the absence of UV light. The photooxidative removal of the herbicide was found to follow pseudo-first-order kinetic, and hence the figure-of-merit electrical energy per order (E_Eo) was considered appropriate for estimating the electrical energy efficiency. A mathematical relation between the apparent reaction rate constant and H₂O₂ used was applied for prediction of the electricity consumption in the photooxidative removal of AB9. The results indicated that this kinetic model, based on the initial rates of degradation, provided good prediction of the E_Eo values for a variety of conditions. The results also indicated that the UV/H₂O₂ process was appropriate as the effective treatment method for removal of AB9 from the contaminated wastewater.     

Evaluation of pollution load of Lahore Canal by quantification of various pollutants through physicochemical characterisation

The work describes the physicochemical analysis of the water samples collected from Lahore Canal to evaluate pollution load at different points of the canal. Different physical and chemical pollutants such as temperature, pH, electrical conductivity, total dissolved and suspended solids, turbidity, chlorides, sulphates, nitrates, oils and grease, dissolved oxygen, chemical oxygen demand and biological oxygen demand (BOD) were analysed. The data was analysed through analysis of variance, which showed that the p values for dissolved oxygen (DO), chemical oxygen demand (COD), BOD, electrical conductivity, total dissolved solid (TDS), total suspended solid (TSS), turbidity, oil and grease, sulphates, and nitrates are <0.05, while p value of temperature, pH, and chlorides are 1.000, 0.984, and 0.070, respectively, which are >0.05. Further regression analysis revealed that the simple line regression modal is fit for turbidity and TSS, electrical conductivity and TDS, COD and DO, BOD and DO, and BOD and COD. The studies reveal that Lahore Canal is receiving a considerable amount of physical and chemical pollutants at different points.     

An Experimental Study on Productivity and Quality Improvement of Horizontal Continuous Casting Process

The aim of the current work is to provide information on how to improve the productivity and quality in the Horizontal Continuous Casting process (HCC). After a first numerical 2D/3D survey about the solidification in the HCC, an experimental investigation has been carried out to validate numerical results. Some casting parameters have been measured and collected: inlet and outlet temperatures, flow rate, heat flux and casting temperature. The study results lead to a correlation between these casting parameters and the casting quality. To obtain the best quality for each alloy, a set of operating parameters has been proposed. There is a very good agreement between the current results and earlier numerical results. Also based on the results, one can gain an insight on the productions of each casting machine and the grades of its quality.     

Extraction of Lignosulfonate from Black Liquor into Construction of a Magnetic Lignosulfonate-Based Adsorbent and Its Adsorption Properties for Dyes from Aqueous Solutions

Journal of Polymers and the Environment - Lignosulfonate, one of the lignin derivatives, was extracted from the black liquor as a byproduct of the wood and paper industry. It was used to prepare...     

Assessment of food-energy-environmental pollution nexus in Iran: the nonlinear approach

Environmental Science and Pollution Research - Iran’s agricultural production has expanded significantly in recent years. Environmental pollution caused by the use of energy and chemical...     

Detection of SARS-CoV-2 in the indoor air of intensive care unit (ICU) for severe COVID-19 patients and its surroundings: considering the role of environmental conditions

Environmental Science and Pollution Research - There is ambiguity about the airborne transmission of the SARS-CoV-2. While a distance of 6 feet is considered a safe physical distance, new findings...